| Text |
- Boot up the iso using a CD/DVD or USB Key to a Live Session
- The system boots properly and loads the installer displaying Welcome dialog with language selection and 'Try FAMILY' and 'Install FAMILY' buttons
- Click on the Install FAMILY icon
- The 'Preparing to install FAMILY' screen is displayed
- On the screen Preparing to install FAMILY, note the state of each check mark for the following components
- Your system have at least the amount a space indicated
- (If on a 'laptop'). Is plugged to a power source
- Is connected to the Internet
- Check marks represent the state of your system accurately
- Click on the continue button
- The 'Installation type' screen is displayed
- Select Install FAMILY XX.XX alongside SYSTEM YY
- (SYSTEM YY is the name of the system already installed on disk (FAMILY 12.04, Windows 7, ...)
- Click on Forward
- The Screen Install FAMILY XX.XX alongsite SYSTEM YY appears
- Note the drive selected on the Select drive list and the bar state
- The drive corresponds to the drive on the chart (e.g /dev/sda) and the bar is divided in half (e.g. 50%).
- Move the slider bar that separates the grey sections to 50%
- The slider bar can be set to 50%
- Click on Install now button
- A confirmation dialog âWrite previous changes to disk and continueâ is displayed
- Click on continue button
- The partition is resized and the 'Where are you?' screen is displayed
- If your system is connected to the network, note the preselected timezone correspond with your timezone and the city indicated in the text box
- The timezone and city displayed match your timezone and a city from your area
- Select your timezone, and click on the continue button
- The 'Keyboard Layout' screen appears
- The proposed keyboard corresponds to your keyboard
- Select your keyboard layout and click on continue
- The 'Who are you?' screen appears
- Input your initial user details and password (Note admin can not be used - it is a dedicated Linux User)
- Name, username and password are accepted. Additionally, the continue button is enabled
- Click on the continue button
- The 'Welcome to FAMILY ' slide is displayed
- Wait for the installer to finish
- An 'Installation Complete' dialog appears
- Click the Restart now button
- GUI is shut down, a prompt to remove media and press Enter appears
- Remove the disc and press enter
- The machine has been rebooted
- Allow the machine to reboot
- The system boots properly and loads into FAMILY
If all actions produce the expected results listed, please submit a 'passed' result.
If an action fails, or produces an unexpected result, please submit a 'failed' result and file a bug. Please be sure to include the bug number when you submit your result.
|
