| Text | Check that an existing system is installed and that sufficient disk space is available for an additional system to be installed during the test
- Boot up the image
- The system boots properly and loads the installer displaying Welcome dialog with language selection and 'Try FAMILY' and 'Install FAMILY' buttons
- Click on the Install FAMILY icon
- The 'Preparing to install FAMILY' screen is displayed
- On the screen Preparing to install FAMILY, note the state of each check mark for the following components
-
- Your system have at least the amount a space indicated
- (If on a 'laptop'). Is plugged to a power source
- Is connected to the Internet
- The check marks represent the state of your system accurately
- Click on the continue button
- The 'Installation type' screen is displayed
- Select Install FAMILY XX.XX alongside SYSTEM YY
- (SYSTEM YY is the name of the system already installed on disk (FAMILY 12.04, Windows 7, ...)
- Click on Forward
- The Screen Install FAMILY XX.XX alongsite SYSTEM YY appears
- Note the drive selected on the Select drive list and the bar state
If the target drive has a free partition with sufficient freespace, install will proceed without further partitioning intervention
- The drive corresponds to the drive on the chart (e.g /dev/sda) and the bar is divided
- Move the slider bar that separates the grey sections as appropriate
- The slider bar can be set as appropriate
- Click on the Install Now button
- The 'Where are you?' screen is displayed
- If your system is connected to the network, note the preselected timezone correspond with your timezone and the city indicated in the text box
- The timezone and city displayed match your timezone and the main city from your area
- Select your timezone, and click on the continue button
- The 'Keyboard Layout' screen appears
- The proposed keyboard corresponds with your keyboard
- Select your keyboard layout and click on continue
- The 'Who are you?' screen appears
- Input your initial user details and password (Note admin can not be used - it is a dedicated Linux User)
- Name, username and password are accepted. Additionally, the continue button is enabled
An Ubuntu One setup page appears for Ubuntu and certain flavours. If it appears complete the next step, otherwise skip it
- Enter details for an existing Ubuntu One account OR for creating New Account. Press Login Later.
- Click on the continue button
- The 'Welcome to FAMILY ' slide is displayed
- The slideshow is entirely in your language
- Wait for the installer to finish
- An 'Installation Complete' dialog appears
- Click the Restart now button
- GUI is shut down, a prompt to remove media and press Enter appears
- Remove the disc and press enter
- The machine is rebooted
- Allow the machine to reboot
- The system boots properly and loads into FAMILY
If all actions produce the expected results listed, please submit a 'passed' result.
If an action fails, or produces an unexpected result, please submit a 'failed' result and file a bug. Please be sure to include the bug number when you submit your result.
|
