Details for revision 2008 of testcase: Install UEFI SecureBoot nVidia



BugReport a bug against the content of this testcase
ID1771
TitleInstall UEFI SecureBoot nVidia
LinkNo link provided
Part of testsuitesUbuntu Desktop

RevisionWritten on the 2024-03-07 09:37 by andersson123
RevisionWritten on the 2023-09-19 18:22 by brian-murray
RevisionWritten on the 2023-09-15 17:36 by brian-murray
Text

Proceed in your native language if you wish. Instructions will remain in English.

This test is to ensure that the image boots in UEFI, that the
resulting installation can boot in UEFI as well, regardless of network
availability and that nVidia proprietary drivers are installed and loaded.

Boot up the image in UEFI mode with Secure Boot enabled
Boot up the image
If you see the GRUB boot menu you should see the following:
  • 'Try or Install FAMILY'
  • 'FAMILY (safe graphics)'
  • 'OEM install (for manufacturers)'
  • 'Test memory' (only on BIOS systems)
  • Select the 'Try or Install FAMILY' option and press Enter
    The system boots properly and loads the installer displaying the Welcome dialog with language selection and the mascot logo on the right.'
    Disconnect from any network using the top panel controls.
    Click on 'Continue'
    The 'Try or Install' screen is displayed with 'try FAMILY' and 'Install FAMILY' buttons
    Click on the release notes hyperlink to confirm that a browser launches and you are taken to the release notes discourse page.
    Click on the 'Install FAMILY' icon to select the option and click on the Continue button
    The 'Keyboard layout' screen appears
    The proposed keyboard corresponds with your keyboard
    Select your keyboard layout and click on Continue
    The 'Connect to a network' screen is displayed
    The screen should reflect the current status and display those elements
  • Wired connection
  • Connect to a Wi-Fi network followed by a scrollable list of available APs, displaying an active one colored with a leading checkmark
  • Connect to a hidden Wi-Fi network
  • I don't want to connect to internet for now
  • Click on 'Next'
    The 'Applications and updates' screen is displayed, listing normal and minimal installation, as well as options for installing updates, third party software and additional media formats.
    Check 'Install third-party software for graphics and Wi-Fi hardware'
    Click on 'Continue'
    The 'Configure secure boot' screen is displayed
    Enter a security key and confirm it
    Click on 'Next'
    The 'Installation type' screen is displayed
    Note the state of the 'Erase disk and install FAMILY' radio button
    The 'Erase disk and install FAMILY' radio button is selected and the 'Advanced features' button is active
    Click on 'Continue'
    The 'Write changes to disk' screen is displayed, including the details of incoming partitions changes.
    Verify that the partitioning details make sense
    The available disk should be used for the installation
    Click 'Start Installing'
    The 'Where are you?' screen is displayed
    If your system is connected to the network, note the preselected timezone corresponds with your timezone and the city indicated in the text box
    The timezone and city displayed match your timezone and a major city from your area
    Select your timezone, and click on the Continue button
    The 'Who are you?' screen appears
    Input your initial user details and password admin can not be used - it is a dedicated Linux User
    Name, username and password are accepted.
    The "Require my password to log in" slider is already highlighted.
    The "Use Active Directory" tickbox is unchecked.
    Click on 'Next'
    The 'Choose your theme' screen is displayed showing light and dark options, as well as color options below.
    Click on 'Next'
    Wait for the installer to finish
    An 'Installation Complete' dialog appears
    Click the 'Restart Now' button
    GUI is shut down, a prompt to remove media and press Enter appears
    Remove the disc and press enter
    The machine is rebooted
    Allow the machine to reboot
    A blue screen titled 'Perform MOK management' is displayed
    In the list of commands select 'Enroll MOK'
    The 'Enroll MOK' screen is displayed
    Select 'Continue'
    The 'Enroll the key(s)' screen is displayed
    Select 'Yes' and enter the password you set in the 'Preparing to install FAMILY' page of the installer
    If the password is correct, the screen 'Perform MOK management' is displayed again
    Select 'Reboot' and allow the machine to reboot
    The system boots properly and loads into FAMILY showing username selected

    If all actions produce the expected results described,
    please submit a 'passed' result.
    If any action fails, or produces an unexpected result,
    please submit a 'failed' result and file a bug. Please be sure to include
    the bug number when you submit your
    result.

    RevisionWritten on the 2023-09-07 19:18 by brian-murray
    RevisionWritten on the 2022-10-18 06:48 by seb128
    RevisionWritten on the 2022-10-18 06:47 by seb128