| Text | Proceed in your native language if you wish. Instructions will remain in English.
This test is to ensure that the image boots in UEFI, that the
resulting installation can boot in UEFI as well, regardless of network
availability and that nVidia proprietary drivers are installed and loaded.
- Boot up the image in UEFI mode with Secure Boot enabled
- Boot up the image
- If you see the GRUB boot menu you should see the following:
-
- 'Try or Install FAMILY'
- 'FAMILY (safe graphics)'
- 'OEM install (for manufacturers)'
- 'Test memory' (only on BIOS systems)
- Select the 'Try or Install FAMILY' option and press Enter
- The system boots properly and loads the installer displaying the Welcome dialog with language selection and the mascot logo on the right.'
- Disconnect from any network using the top panel controls.
- Click on 'Continue'
- The 'Try or Install' screen is displayed with 'try FAMILY' and 'Install FAMILY' buttons
- Click on the release notes hyperlink to confirm that a browser launches and you are taken to the release notes discourse page.
- Click on the 'Install FAMILY' icon to select the option and click on the Continue button
- The 'Keyboard layout' screen appears
- The proposed keyboard corresponds with your keyboard
- Select your keyboard layout and click on Continue
- The 'Connect to internet' screen is displayed
- The screen should reflect the current status and display those elements
-
- Wired connection
- Connect to a Wi-Fi network followed by a scrollable list of available APs, displaying an active one colored with a leading checkmark
- Connect to a hidden Wi-Fi network
- I don't want to connect to internet for now
- Click on 'Continue'
- The 'Updates and other software' screen is displayed, listing normal and minimal installation.
- Check 'Install third-party software for graphics and Wi-Fi hardware'
- Click on 'Continue'
- The 'Configure secure boot' screen is displayed
- Enter a security key and confirm it
- Click on 'Continue'
- The 'Installation type' screen is displayed
- Note the state of the 'Erase disk and install FAMILY' radio button
- The 'Erase disk and install FAMILY' radio button is selected and the 'Advanced features' button is active
- Click on 'Continue'
- The 'Write changes to disk' screen is displayed, including the details of incoming partitions changes.
- Verify that the partitioning details make sense
- The available disk should be used for the installation
- Click 'Start Installing'
- The 'Where are you?' screen is displayed
- If your system is connected to the network, note the preselected timezone corresponds with your timezone and the city indicated in the text box
- The timezone and city displayed match your timezone and a major city from your area
- Select your timezone, and click on the Continue button
- The 'Who are you?' screen appears
- Input your initial user details and password admin can not be used - it is a dedicated Linux User
- Name, username and password are accepted.
- Continue button becomes available
- Click on 'Continue'
- The 'Choose your look' screen is displayed showing light and dark options
- Click on 'Continue'
- The 'Welcome to FAMILY' slide is displayed
- The slideshow is entirely in your language
- Wait for the installer to finish
- An 'Installation Complete' dialog appears
- Click the 'Restart into FAMILY XX.XX' button
- GUI is shut down, a prompt to remove media and press Enter appears
- Remove the disc and press enter
- The machine is rebooted
- Allow the machine to reboot
- A blue screen titled 'Perform MOK management' is displayed
- In the list of commands select 'Enroll MOK'
- The 'Enroll MOK' screen is displayed
- Select 'Continue'
- The 'Enroll the key(s)' screen is displayed
- Select 'Yes' and enter the password you set in the 'Preparing to install FAMILY' page of the installer
- If the password is correct, the screen 'Perform MOK management' is displayed again
- Select 'Reboot' and allow the machine to reboot
- The system boots properly and loads into FAMILY showing username selected
If all actions produce the expected results described,
please submit a 'passed' result.
If any action fails, or produces an unexpected result,
please submit a 'failed' result and file a bug. Please be sure to include
the bug number when you submit your
result.
|
