| Text | Follow the installation steps at IoT installation media
- During boot, verify that:
- You see u-boot output during boot
- You see something on the connnected monitor after boot
- Once logged in, verify that:
- A connected USB keyboard works:
- when connected to a USB2 (black) port
- when connected to a USB3 (blue) port
free reports RAM consistent with the specifc device.- The ethernet adapter received an IP address.
- The device responds to a ping request.
- It is possible to ssh to the device.
- Configure wifi via netplan. Preferably, on a different subnet than ethernet. If that isn't possible disconnect ethernet.
network: version: 2 wifis: wlan0: access-points: wap_ssid_here: password: wap_password_here dhcp4: yes
- You hear audio output from:
- the 3.5mm jack
- HDMI 0
- HDMI 1
sudo flash-kernel produces no error messagessudo shutdown reboot reboots the devicesudo shutdown -h now powers off the device- Performing a large (300-600mb) file copy to USB storage works
- Copy the large file to USB storage
sync- Check
dmesg for errors
- Unmount and remount the USB storage
- Verify the md5sum of the file
- Boot with the 2nd HDMI port connected. Verify that you see output on the 2nd monitor instead of the 1st.
If all actions produce the expected results listed, please submit a 'passed' result.
If an action fails, or produces an unexpected result, please submit a 'failed' result and file a bug. Please be sure to include the bug number when you submit your result.
|
