Details for revision 1326 of testcase: Install (live session)

BugReport a bug against the content of this testcase
TitleInstall (live session)
LinkNo link provided
Part of testsuitesUbuntu Desktop Run-Once
Ubuntu Cinnamon Desktop

RevisionWritten on the 2018-03-13 16:05 by flocculant
RevisionWritten on the 2016-11-17 13:17 by flocculant
RevisionWritten on the 2016-10-27 13:24 by flocculant
RevisionWritten on the 2016-05-20 12:39 by flocculant
RevisionWritten on the 2014-04-23 12:01 by elfy
RevisionWritten on the 2014-01-23 11:00 by nskaggs

Proceed in your native language if you wish. Instructions will remain in English

Boot up the image
FAMILY boot screen is displayed
When ubiquity starts select your language in the left column
Language is selected, all labels are changed to translated versions
Press "Try FAMILY" and wait for the Live session to start
The default desktop is displayed
Use the desktop and open some applications to try FAMILY before installing
Go to the Install FAMILY icon (usually on the desktop) and install from the Live session
On the screen Preparing to install FAMILY, note the state of each check mark for the following components
  • Your system have at least the amount a space indicated
  • (If on a 'laptop'). Is plugged to a power source
  • Is connected to the Internet
Check marks represent the state of your system accurately
Click on the continue button
The 'Installation type' screen is displayed
Note the state of the 'Erase disk and install FAMILY' radio button
The 'Erase disk and install FAMILY' radio button should be checked
Click on the continue button (if there is only one hard disk in the system, the button should read 'Install now')
If there is only one hard disk, the installer should skip to the "Where are you?' screen. Otherwise, the 'Installation type' screen is displayed
If there is only one hard disk, skip to step 10 (On the 'Where are you?' screen...). Otherwise, on the 'Installation type' screen verify that the drive selected on the Select drive list corresponds to the drive on the chart (e.g /dev/sda)
Selected drive is displayed on the chart
Verify that the full drive space is allocated
Full drive space is allocated for installation
Click on Install Now button
The 'Where are you?' screen is displayed
If your system is connected to the network, note the preselected timezone correspond with your timezone and the city indicated in the text box
The timezone and city displayed match your timezone and a city from your area
Select your timezone, and click on the continue button
The 'Keyboard Layout' screen appears
The proposed keyboard corresponds to your keyboard
Select your keyboard layout and click on continue
The 'Who are you?' screen appears
Input your initial user details and password (Note admin can not be used - it is a dedicated Linux User)
Name, username and password are accepted. Additionally, the continue button is enabled
Click on the continue button

An Ubuntu One setup page appears for Ubuntu and certain flavours. If it appears complete the next step, otherwise skip it

Enter details for an existing Ubuntu One account OR for creating New Account. Press Login Later.
The 'Welcome to FAMILY ' slide is displayed
Wait for the installer to finish
An 'Installation Complete' dialog appears
Click the Restart now button
GUI is shut down, a prompt to remove media and press Enter appears
Remove the disc and press enter
The machine has been rebooted
Allow the machine to reboot
The system boots properly and loads into FAMILY

If all actions produce the expected results listed, please submit a 'passed' result.
If an action fails, or produces an unexpected result, please submit a 'failed' result and file a bug. Please be sure to include the bug number when you submit your result.

RevisionWritten on the 2013-10-28 12:38 by nskaggs
RevisionWritten on the 2013-10-07 11:25 by nskaggs
RevisionWritten on the 2013-05-30 17:34 by nskaggs
RevisionWritten on the 2013-03-28 16:32 by nskaggs
RevisionWritten on the 2013-02-22 18:13 by nskaggs