| Text | Proceed in your native language if you wish. Instructions will remain in English
- Boot up the image
- The system boots properly
- When you see the aubergine screen with an icon at the bottom, press any key to get the menu
- Language list will appear
- Select your language and then press Enter
- The installer menu is displayed
- Press F4 and select ‘OEM Install (for manufacturers)’’ and press Enter
- The installer menu is displayed again
- Press Enter on the ‘Try FAMILY without installing’ option
- The live session is loaded
- Double Click on ‘Install FAMILY’
- The ubiquity installer starts, with a welcome dialog with language selection
- Type a series name E.G. "QATeam"
- Click on continue
- The 'Preparing to install FAMILY' screen is displayed
- On the screen Preparing to install FAMILY, note the state of each check mark for the following components
-
- Your system have at least the amount a space indicated
- (if a laptop) Is plugged to a power source
- Is connected to the Internet
- Check marks represent the state of your system accurately
- Click on the continue button
- The 'Installation type' screen is displayed
- Note the state of the 'Check Erase Disk and install FAMILY' radio button
- The 'Check Erase Disk and install FAMILY' radio button is checked
- Click on the continue button
- The 'Erase Disk and install FAMILY' is displayed
- Verify that the drive selected on the Select drive list correspond to the drive on the chart (e.g /dev/sda)
- Selected drive is displayed on the chart
- Verify that the full drive space is allocated
- Full drive space is allocated for installation
- Click on Install Now button
- The 'Where are you?' screen is displayed
- If your system is connected to the network, note the preselected timezone correspond with your timezone and the city indicated in the text box
- The timezone and city displayed match your timezone and a city from your area
- Select your timezone, and click on the continue button
- The 'Keyboard Layout' screen appears
- The proposed keyboard corresponds to your keyboard
- Select your keyboard layout and click on continue
- The 'Who are you?' screen appears
- Input Password
- password is accepted, the series name you typed earlier is visible but cannot be edited. Additionally, the continue button is enabled
- Click on the continue button
- The 'Welcome to FAMILY ' slide is displayed
- The slideshow is entirely in your language
- Wait for the installer to finish
- An 'Installation Complete' dialog appears
- Click the Restart now button
- GUI is shut down, a prompt to remove media and press Enter appears
- Remove the disc and press enter
- The machine has been rebooted
- Allow the machine to reboot
- The system boots properly and loads into FAMILY
- Execute the following command on the command line to install any updates that may be present
sudo apt-get update && sudo apt-get dist-upgrade
- The system updates and installs new packages (if any exist)
- Restart the computer
- The system restarts and boots into the FAMILY desktop
- Double click the ‘Prepare for shipping to end user’ icon on the desktop
- The OEM config preparation window appears
- Enter your oem password and click ok
- The window is closed
- Shutdown the machine and remove the install disc. Turn the machine back on
- The system boots into the end-user installer (Note that any case where the user is taken out of a graphical experience should be filed as a bug)
- Select a language and click Continue
- The timezone screen is displayed
- Select a timezone and click Continue
- Keyboard Layout screen is displayed
- Select a keyboard layout and click Continue
- User details screen is displayed
- Add end user details and click Continue
- After a wait, the login screen appears
- Type in the ‘end users’ username and password and hit enter
- The machine logins successfully
- Execute the following command on the command line:
lsb_release -rd
- Both the description and the release presented matches the version of FAMILY you installed
- Execute the following command on the command line:
arch
- Verify the result correctly lists the architecture of the installation you installed. For example, x86_64 for 64-bit x86 machine.
- Execute the following command on the command line:
sudo sfdisk -l
- Verify the partition scheme displayed matches the partition scheme you chose during installation
- Execute the following command on the command line:
sudo apt-get update
- Apt hits each of the package mirrors and update all of them without error
- Launch 'update-manager' (for quantal this is being renamed to software-updater) and install any updates presented
- The updates are downloaded and installed without error
- Launch 'firefox' and navigate to http://www.FAMILY.com
- The FAMILY homepage is loaded and displays properly
- Launch 'Time & Date' settings menu and note the timezone information and local time and date
- The timezone, date and time match the settings you selected during installation
- If you installed a non-english version of FAMILY, note the language used on the desktop
- The desktop is localized into your language, or it has prompted you upon initial login to install the missing components for your language
If all actions produce the expected results listed, please submit a 'passed' result.If an action fails, or produces an unexpected result, please submit a 'failed' result and file a bug. Please be sure to include the bug number when you submit your result.
|
