Install Unmatched in Ubuntu Server riscv64+unmatched in Focal 20.04.5 (archived)

The scope of this test is to ensure that riscv64+unmatched image boots from SD card on SiFive Hifive Unmatched board

Flash downloaded image onto SD card

You can use Gnome Disks app to restore img.xz onto the SD card

Alternatively you can use xz -d to decompress, and then dd to copy the image to the SD card

Connect networking, serial console to the board

Ethernet cable for networking

MicroUSB cable for serial console

Check the board switches to ensure they are in sdcard mode

MSEL2 to the inside of the board, the rest to the outside

Connect to the serial console

sudo screen /dev/ttyUSB1 115200

Power on the board

You should see U-BOOT menu

It should then boot default entry after a delay

After a while cloud-init will run

Then serial login will appear, but will not work

Then cloud-init will finally finish (~250s)

Then one will be able to login

Login and change password

Login using ubuntu for both username and password

Reenter ubuntu password again

Set new password

Confirm the new password

Perform generic testing

Check that apt update works

Run any command that is not installed, check that command-not-found recommends things to install

e.g. hello

Install a package and check that it works, e.g. hello

Perform snap testing

Install a snap and check that it works, e.g. hello

Poweroff

Console messages should reach poweroff target

There should be final kernel dmsg powering off

The board should poweroff gracefully

Reboot

The board should reboot gracefully

If all actions produce the expected results listed, please submit a 'passed' result.
If an action fails, or produces an unexpected result, please submit a 'failed' result and file a bug. Please be sure to include the bug number when you submit your result.