Proceed in your native language if you wish. Instructions will remain in English
- Select a language for the install and press Enter
- Select a location for the install and press Enter
- On Keyboard Layout select No and press Enter
- Select the origin of the keyboard and press Enter /!\ The default for your location and language should already be selected.
- Select the layout you wish to use on the keyboard and press Enter /!\ The default for your location and language should already be selected.
- Add a hostname for the machine and press Enter
- Select Manual and press Enter
- Select Configure iSCSI volumes
- Select Log into iSCSI targets /!\ If the machine is diskless, these steps will appear before selecting the partition scheme
- Enter the IP address of the iSCSI target
- Enter the username configured in the iSCSI target
- Enter the password configured in the iSCSI target
- Select a target from the list
- Select Finish
- On the list of partitions, select the new one (VIRTUAL DISK)
- Select pri/log "drive size" FREE SPACE and press Enter
- Select Create a new partition and press Enter
- Change the size to 20.0 GB and press Enter /!\ Alter for smaller drives
- Select Primary and press Enter
- Select Beginning and press Enter
- Select Use as: line and press Enter
- Select Ext4 journaling file system and press Enter
- Select Done setting up the partition and press Enter
- Select pri/log "drive size" FREE SPACE and press Enter
- Select Create a new partition and press Enter
- Change the size to 2.0 GB and press Enter /!\ Alter for smaller drives
- Select Logical and press Enter
- Select Beginning and press Enter
- Select Use as: line and press Enter
- Select swap area and press Enter
- Select Done setting up the partition and press Enter
- Select pri/log "drive size" FREE SPACE and press Enter
- Select Create a new partition and press Enter
- Press Enter to use the whole of the space remaining
- Select Logical and press Enter
- Select Beginning and press Enter
- Select Use as: line and press Enter
- Select Ext4 journaling file system and press Enter
- Select Done setting up the partition and press Enter
- Select Finish partitioning and write changes to disk and press Enter
- Select Yes to accept the changes and press Enter
- Type in your name and press Enter
- Add a username and press Enter
- Add a password and press Enter
- Confirm your password and press Enter
- Select No for encrypted home directory and press Enter
- Input http proxy info or press Enter
- Wait for a while /!\ The install may seem like it has locked at 6% but is actually working in the background.
- Select Yes to setting your clock to utc and press Enter
- Remove the cd and press Enter
- This will then reboot the machine log in and check the desktop is installed
If all actions produce the expected results listed, please submit a 'passed' result.
If an action fails, or produces an unexpected result, please submit a 'failed' result and file a bug. Please be sure to include the bug number when you submit your result.
