| Text | Proceed in your native language if you wish. Instructions will remain in English.
- Boot up the image
- If you see the GRUB boot menu you should see the following:
-
- 'Try or Install FAMILY'
- 'FAMILY (safe graphics)'
- 'OEM install (for manufacturers)'
- 'Test memory' (only on BIOS systems)
- The system boots properly and loads the installer displaying the Welcome dialog with language selection and 'Try FAMILY' and 'Install FAMILY' buttons
- Click on the release notes hyperlink to confirm that a browser launches and you are taken to the release notes discourse page.
- Click on the Install FAMILY button
- The 'Keyboard layout' screen appears
- The proposed keyboard corresponds with your keyboard
- Select your keyboard layout and click on Continue
- The 'Updates and other software' screen is displayed
- On the screen 'Updates and other software', note the availability of the following components
- Available options should represent the state of your system accurately
- For Mantic and later releases, the default install is a minimal install. Releases before Mantic the default is a 'full' install, complete with other apps a user might want. The new, default, install does not include these add-ons.
-
- (If network is available) 'Download updates while installing FAMILY'
- (If on a 'laptop') 'Is plugged to a power source'
- 'Install third-party software...' option available
- Click on the Continue button
- The 'Installation type' screen is displayed
- Note the state of the 'Erase disk and install FAMILY' radio button
- The 'Erase disk and install FAMILY' radio button is selected and the 'Advanced features' button is active
- Click on the 'Advanced features...' button
- The 'Advanced Features' dialog is displayed
- Select 'Erase disk and use ZFS'
- 'Erase disk and use ZFS' is selected
- Check the tickbox for 'Encrypt the new Ubuntu installation for security'
- Click on the 'OK' button
- The dialog closes and 'ZFS selected' is displayed next to the 'Advanced features...' button
- Click Continue
- The "Choose a security key" slide opens
- Enter your desired security key
- Tick the "Enable recovery key" checkbox
- Enter your desired recovery key
- Click the downwards arrow icon, and click "Open" in the popup window
- Open a terminal window and run the following commands:
- cat /home/ubuntu/recovery.key
- Verify the recovery key matches your inputted recovery key
- Close the terminal window
- Click on the 'Install Now' button
- 'Write the changes to disks' dialogue appears
- Click Continue
- If there is only one hard disk, skip to step 18 (On the 'Where are you?' screen...). Otherwise, on the 'Installation type' screen verify that the drive selected on the Select drive list corresponds to the drive on the chart (e.g /dev/sda)
- Selected drive is displayed on the chart
- Verify that the full drive space is allocated
- Full drive space is allocated for installation
- Click on the Install Now button
- The 'Where are you?' screen is displayed
- If your system is connected to the network, note the preselected timezone corresponds with your timezone and the city indicated in the text box
- The timezone and city displayed match your timezone and a major city from your area
- Select your timezone, and click on the Continue button
- The 'Who are you?' screen appears
- Input your initial user details and password admin can not be used - it is a dedicated Linux User
- 'Require my password to log in' is shown and selected or if 'Log in automatically' and 'require my password to log in' are shown then 'Require my password to login' is selected. If just 'Require my password to log in' is shown, having it off is the equivalent of having 'Log in automatically' on.
- Name, username and password are accepted.
- Continue button becomes available
- Press Continue
- The 'Welcome to FAMILY' slide is displayed
- The slideshow is entirely in your language
- Wait for the installer to finish
- An 'Installation Complete' dialog appears
- Click the 'Restart Now' button
- GUI is shut down, a prompt to remove media and press Enter appears
- Remove the disc and press enter
- The machine is rebooted
- Allow the machine to reboot
- The system boots properly and your passphrase works
- The system loads into FAMILY showing username selected
- Upon login, open a terminal, run the following commands and verify it matches the output
$ zfs mount | sort
bpool/BOOT/ubuntu_UUID /boot
rpool/ROOT/ubuntu_UUID /
rpool/ROOT/ubuntu_UUID/srv /srv
rpool/ROOT/ubuntu_UUID/usr/local /usr/local
rpool/ROOT/ubuntu_UUID/var/games /var/games
rpool/ROOT/ubuntu_UUID/var/lib/AccountsService /var/lib/AccountsService
rpool/ROOT/ubuntu_UUID/var/lib/apt /var/lib/apt
rpool/ROOT/ubuntu_UUID/var/lib/dpkg /var/lib/dpkg
rpool/ROOT/ubuntu_UUID/var/lib/NetworkManager /var/lib/NetworkManager
rpool/ROOT/ubuntu_UUID/var/lib /var/lib
rpool/ROOT/ubuntu_UUID/var/log /var/log
rpool/ROOT/ubuntu_UUID/var/mail /var/mail
rpool/ROOT/ubuntu_UUID/var/snap /var/snap
rpool/ROOT/ubuntu_UUID/var/spool /var/spool
rpool/ROOT/ubuntu_UUID/var/www /var/www
rpool/USERDATA/root_0y7dio /root
rpool/USERDATA/u_0y7dio /home/u
- Run the lsblk command and check for this line in the output:
- cryptoswap 252:1 0 2.6G 0 crypt [SWAP]
If all actions produce the expected results described,
please submit a 'passed' result.
If any action fails, or produces an unexpected result,
please submit a 'failed' result and file a bug. Please be sure to include
the bug number when you submit your
result.
|
