Details for revision 1027 of testcase: Non-English Installation No Network



BugReport a bug against the content of this testcase
ID1312
TitleNon-English Installation No Network
LinkNo link provided
Part of testsuitesUbuntu Desktop Run-Once (arm64)
Ubuntu Budgie
Ubuntu Desktop

RevisionWritten on the 2023-04-13 13:04 by brian-murray
RevisionWritten on the 2018-03-13 16:02 by flocculant
RevisionWritten on the 2016-11-17 13:14 by flocculant
RevisionWritten on the 2016-10-27 13:20 by flocculant
RevisionWritten on the 2016-05-20 12:36 by flocculant
RevisionWritten on the 2014-04-23 11:57 by elfy
RevisionWritten on the 2013-10-28 12:37 by nskaggs
RevisionWritten on the 2013-10-07 11:23 by nskaggs
RevisionWritten on the 2013-06-28 12:33 by nskaggs
Text

The goal of this test case is to check that localization support is functional during the installation, that language packs are installed correctly for those languages in the ISO, and that an informational message is shown prompting users to connect to the Internet to fully install language support for those languages not included.

Start your machine with the install media in place and no network connection present. When you see the aubergine screen with an icon at the bottom, press any key to get the menu
Language list will appear
Use arrow keys to select language and press Enter
Language list will close.
The installer is localized from this screen onwards
Boot up the iso using a CD/DVD or USB Key to a Live Session
The system boots properly and loads the installer displaying Welcome dialog with language selection and 'Try FAMILY' and 'Install FAMILY' buttons
Click on the Install FAMILY icon
The 'Preparing to install FAMILY' screen is displayed
On the screen Preparing to install FAMILY, note the state of each check mark for the following components
  • Your system have at least the amount a space indicated
  • (If on a 'laptop'). Is plugged to a power source
  • Is connected to the Internet
Check marks represent the state of your system accurately
Click on the continue button
The 'Installation type' screen is displayed
Note the state of the 'Erase disk and install FAMILY' radio button
The 'Erase disk and install FAMILY' radio button is checked
Click on the continue button (if there is only one hard disk in the system, the button should read 'Install now')
If there is only one hard disk, the installer skips to the "Where are you?' screen. Otherwise, the 'Installation type' screen is displayed
If there is only one hard disk, skip to step 10 (On the 'Where are you?' screen...). Otherwise, on the 'Installation type' screen verify that the drive selected on the Select drive list corresponds to the drive on the chart (e.g /dev/sda)
Selected drive is displayed on the chart
Verify that the full drive space is allocated
Full drive space is allocated for installation
Click on Install Now button
The 'Where are you?' screen is displayed
Select your timezone, and click on the continue button
The 'Keyboard Layout' screen appears
The proposed keyboard corresponds to your keyboard
Select your keyboard layout and click on continue
The 'Who are you?' screen appears
Input your initial user details and password (Note admin can not be used - it is a dedicated Linux User)
Name, username and password are accepted. Additionally, the continue button is enabled
Click on the continue button
The 'Welcome to FAMILY ' slide is displayed
The installer's slideshow slides are completely localized
Wait for the installer to finish
An 'Installation Complete' dialog appears
Click the Restart now button
GUI is shut down, a prompt to remove media and press Enter appears
Remove the disc and press enter
The machine has been rebooted
Allow the machine to reboot
The system boots properly and loads into FAMILY
Verify that your system is localized
If you aren't using Bengali (bn), German (de), English (en), Spanish (es), French(fr), Portuguese (pt) or Xhosa (xh) a pop up appears showing saying your language support is not complete
For any language, the system has to be fully localized. Note: the translation coverage of some languages might not be complete
If you are using one of the above languages the calendar shows the regional settings correctly

If all actions produce the expected results listed, please submit a 'passed' result.
If an action fails, or produces an unexpected result, please submit a 'failed' result and file a bug. Please be sure to include the bug number when you submit your result.

RevisionWritten on the 2013-05-30 17:32 by nskaggs
RevisionWritten on the 2013-03-28 16:28 by nskaggs
RevisionWritten on the 2013-02-22 12:30 by nskaggs
RevisionWritten on the 2012-09-25 13:48 by nskaggs
RevisionWritten on the 2012-09-24 15:13 by nskaggs
RevisionWritten on the 2012-07-19 16:29 by nskaggs
RevisionWritten on the 2012-07-19 16:13 by nskaggs
RevisionWritten on the 2012-07-19 13:45 by nskaggs