Install JH7110 in Ubuntu Server Subiquity riscv64 in Noble 24.04.2 (archived)

The scope of this test is to ensure that riscv64+jh7110 image boots from SD card on JH7110 based boards

Flash downloaded image onto SD card

You can use Gnome Disks app to restore img.xz onto the SD card

Alternatively you can use xz -d to decompress, and then dd to copy the image to the SD card

Connect networking, serial console to the board

Ethernet cable for networking

USB to TTL adapter for serial console

Connect to the serial console

sudo screen /dev/ttyUSB0 115200

Power on the board

You should see U-BOOT output

It should then boot GRUB after a delay

You should see GRUB menu

It should then boot the default kernel after a delay

After a while cloud-init will run

Wait for the 'Cloud-init finished' message

Then one will be able to login

Login and change password

Login using ubuntu for both username and password

Reenter ubuntu password again

Set new password

Confirm the new password

Perform generic testing

Check that apt update works

Run any command that is not installed, check that command-not-found recommends things to install

e.g. hello

Install a package and check that it works, e.g. hello

Reboot

The board should reboot normally

Poweroff

Console messages should reach poweroff target

There should be final kernel dmsg powering off

Manually turn power-off from the board

If all actions produce the expected results listed, please submit a 'passed' result.
If an action fails, or produces an unexpected result, please submit a 'failed' result and file a bug. Please be sure to include the bug number when you submit your result.