Details for revision 714 of testcase: Install (Preseed)

BugReport a bug against the content of this testcase
TitleInstall (Preseed)
LinkNo link provided
Part of testsuitesUbuntu Server

RevisionWritten on the 2014-01-23 10:59 by nskaggs
RevisionWritten on the 2013-10-07 11:24 by nskaggs
RevisionWritten on the 2013-05-30 17:33 by nskaggs
RevisionWritten on the 2013-04-04 13:58 by nskaggs
RevisionWritten on the 2013-03-28 16:29 by nskaggs

Scope of this test is to verify that the system is installed in itself starting from the setting hostname step.

WARNING This test uses pre-selected answers to installation questions (the preseed file). The preseed in use will unilaterally allocate the whole hard drive for the install. This will cause the complete loss of any data then in the hard drive. We strongly recommend you to use a 'trash and burn' system -- i.e., a system you do not mind losing the contents of the hard drive(s). Virtual machines are also a good option (and a nice helper to boot an Ubuntu ISO is testdrive). It is also a good idea to disconnect any external hard drive(s) you do not want to participate in the reformatting.
On a trash and burn server, boot the UBuntu Server ISO (or, for VMs, run testdrive, and select either an i386 or an amd64 server image -- should be options 2 or 7).

Boot from CD or USB in real hardware or run the image in Testdrive
Choose the desired language, press F6, Esc, and F8. This will show you the Boot Options line:
Boot Options file=/cdrom/preseed/ubuntu-server.seed vga=788 initrd=/install/initrd.gz quiet --
Replace 'file=/cdrom/preseed/ubuntu-server.seed' by 'auto url='. The Boot Options line should now look like:
Boot Options auto url= vga=788 initrd=/install/initrd.gz quiet --
Press Enter to accept the boot command line and start the installation
Choose the language
Select your location
Configure locales
At configure keyboard page, select NO
Select the country of the keyboard
Select the keyboard layout
Select hostname ubuntu as default
From this point on, the installation should proceed automatically. Wait until the system reboots.
At the login insert ubuntu as userid and ubuntu as password
Verify that the server is working executing:
the output should look like:
                njin@quantic:~/Ubuntu$ ntptime
                ntp_gettime() returns code 0 (OK)
                time d3d92552.3858c000  Fri, Aug 17 2012 22:17:22.220, (.220104),
                maximum error 4516 us, estimated error 16 us, TAI offset 0
                ntp_adjtime() returns code 0 (OK)
                modes 0x0 (),
                offset 0.000 us, frequency 0.000 ppm, interval 1 s,
                maximum error 4516 us, estimated error 16 us,
                status 0x1 (PLL),
                time constant 7, precision 1.000 us, tolerance 500 ppm,

If all actions produce the expected results listed, please submit a 'passed' result.
If an action fails, or produces an unexpected result, please submit a 'failed' result and file a bug. Please be sure to include the bug number when you submit your result.

RevisionWritten on the 2012-10-11 14:07 by nskaggs
RevisionWritten on the 2012-08-17 16:23 by fabiomarconi