 | old-database | 2007-04-19 00:00 |
[regression] 7.2 broke vesa: "No matching modes found" (#89853)
| In: |
xorg (Ubuntu) |
| Status: |
Fix Released |
| Importance: |
High |
| Assignee: |
|
1 reports, 192 comments, 24 subscribers, 23 duplicates
| Fails to load on a Macbook Pro. Related to this bug.
https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/89853
| |
| old-database | 2007-04-19 00:00 |
[regression] 7.2 broke vesa: "No matching modes found" (#89853)
| In: |
xorg (Ubuntu) |
| Status: |
Fix Released |
| Importance: |
High |
| Assignee: |
|
1 reports, 192 comments, 24 subscribers, 23 duplicates
| i6400 with a ati x1400
Related to this bug aswell
https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/89853
| |
| old-database | 2007-04-18 00:00 | | X won't start on Dell Inspiron e1405 w/ Intel 945GM graphics card.
I tried dpkg-reconfigure xserver-xorg, which didn't help. When I type "startx" I get an error saying (roughly):
"/usr/bin/X11/X
error while loading shared libraries: /usr/lib/libfontenc.so.1
invalid ELF header
errno 111
errno 03"
| |
| old-database | 2007-04-18 00:00 |
loading ACPI modules and starting HALd took too long time (#107516)
| In: |
casper (Ubuntu) |
| Status: |
Invalid |
| Importance: |
Undecided |
| Assignee: |
|
1 reports, 10 comments, 10 subscribers, 1 duplicates
| Loading ACPI modules and starting HALd took too long time.
I found it takes more than half a minute to load ACPI modules and start HALd on my Thinkpad R51e-2xc, with Feisty RC live CD.
The computer looks dead in those two steps.
This problem happened at the first release of Feisty Beta and it was ok after once I upgraded the system.
But now it happened again.
| |
| old-database | 2007-04-18 00:00 | | I downloaded the 20070415 Desktop CD for i386.
On my system is one problem which is severe:
After going to System->End and choosing Restart
the system shuts down until the CD is ejected but
then the system freezes.
I cannot continue to reboot..I have to totally disconnect from power and then power on.
My system is a Fujitsu Siemens with PentiumIV.
Here is the lspci:
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 645xx (rev 51)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964 [MuTIOL Media IO] (rev 36)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
00:05.0 IDE interface: Silicon Integrated Systems [SiS] RAID bus controller 180 SATA/PATA [SiS] (rev 01)
00:08.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 61)
00:12.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:14.0 Modem: Smart Link Ltd. SmartLink SmartPCI562 56K Modem (rev 04)
01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 4000 AGP 8x] (rev c1)
Here is lsmod:
Module Size Used by
binfmt_misc 12680 1
rfcomm 40856 0
l2cap 25728 5 rfcomm
bluetooth 55908 4 rfcomm,l2cap
ppdev 10116 0
speedstep_lib 6148 0
cpufreq_userspace 5408 0
cpufreq_powersave 2688 0
cpufreq_conservative 8200 0
cpufreq_ondemand 9228 0
cpufreq_stats 7360 0
freq_table 5792 2 cpufreq_ondemand,cpufreq_stats
tc1100_wmi 8068 0
sony_acpi 6284 0
dev_acpi 12292 0
pcc_acpi 13184 0
asus_acpi 17308 0
backlight 7040 1 asus_acpi
ac 6020 0
battery 10756 0
sbs 15652 0
i2c_ec 5888 1 sbs
video 16388 0
container 5248 0
button 8720 0
dock 10268 0
ipv6 268704 8
nls_utf8 3072 0
ntfs 107764 0
sbp2 23812 0
lp 12452 0
fuse 46612 0
snd_intel8x0 34204 1
snd_ac97_codec 98336 1 snd_intel8x0
ac97_bus 3200 1 snd_ac97_codec
snd_pcm_oss 44544 0
snd_mixer_oss 17408 1 snd_pcm_oss
snd_pcm 79876 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 4740 0
snd_seq_oss 32896 0
snd_seq_midi 9600 0
snd_rawmidi 25472 1 snd_seq_midi
snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi
i2c_core 22784 1 i2c_ec
parport_pc 36388 1
serio_raw 7940 0
snd_seq 52592 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 23684 2 snd_pcm,snd_seq
snd_seq_device 9100 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
parport 36936 3 ppdev,lp,parport_pc
psmouse 38920 0
pcspkr 4224 0
snd 54020 12 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 8672 1 snd
snd_page_alloc 10888 2 snd_intel8x0,snd_pcm
sis_agp 9604 1
shpchp 34324 0
pci_hotplug 32576 1 shpchp
agpgart 35400 1 sis_agp
af_packet 23816 6
tsdev 8768 0
evdev 11008 3
8139cp 25088 0
ext3 133128 1
jbd 59816 1 ext3
mbcache 9604 1 ext3
ide_cd 32672 0
cdrom 37664 1 ide_cd
ide_disk 17024 3
sata_sis 10500 0
pata_sis 14220 1 sata_sis
ata_generic 9092 0
libata 125720 3 sata_sis,pata_sis,ata_generic
scsi_mod 142348 2 sbp2,libata
floppy 59524 0
ehci_hcd 34188 0
8139too 27648 0
ohci1394 36528 0
ieee1394 299448 2 sbp2,ohci1394
generic 5124 0 [permanent]
sis900 24704 0
mii 6528 3 8139cp,8139too,sis900
ohci_hcd 22532 0
usbcore 134280 3 ehci_hcd,ohci_hcd
sis5513 14856 0 [permanent]
thermal 14856 0
processor 31048 1 thermal
fan 5636 0
fbcon 42656 0
tileblit 3584 1 fbcon
font 9216 1 fbcon
bitblit 6912 1 fbcon
softcursor 3200 1 bitblit
vesafb 9220 0
capability 5896 0
commoncap 8192 1 capability
| |
| old-database | 2007-04-18 00:00 |
[agp] X.org does not initialize screen on IBM T20, T21, T22 (#33617)
| In: |
xorg (Ubuntu) |
| Status: |
Invalid |
| Importance: |
Undecided |
| Assignee: |
|
1 reports, 130 comments, 22 subscribers, 3 duplicates
| FAIL: X still has issues with ThinkPad T20 (Live-CD)
Normal mode: Blank screen and system lockup
Safe graphics mode: X starts and desktop appears, but in the wrong resolution (800x600 instead of 1024x768). Preferences -> Screen Resolution doesn't show 1024x768 as an option. Can't proceed to install from live mode because Welcome install windows is too large to fit on-screen and buttons at bottom of window are off-screen and cannot be accessed.
Likely related to this bug:
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-savage/+bug...
| |
| old-database | 2007-04-18 00:00 | | FAIL: X fails to load on my macbook pro for the Live CD. I have to manually put in the correct HorizSync and VertRefresh values into xorg.conf and then start X again. I'm not sure, but I think it's related to
https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/89853
Also, when I get X to start on the Live CD the mouse is extremely jittery. It jitters about 10 times a second from left to right about 1 or 2 inches at a constant rate. The strange thing is that I can plug in a usb mouse and then put two fingers on the touchpad to make the jittering stop.
| |
| Barrius | 2007-04-17 00:00 |
[apport] compiz.real crashed with SIGSEGV in doPoll() (#90061)
| In: |
compiz (Ubuntu) |
| Status: |
Fix Released |
| Importance: |
High |
| Assignee: |
|
1 reports, 13 comments, 2 subscribers, 3 duplicates
| feisty-desktop-i386.iso Running under VirtualBox 1.3.8, 512mb Ram, 8Gb disk
Initial boot: Once F6 selected "F6 Other options" is removed from screen therafter
Memtest Stuck on "64K e820 std" [Edit: second test worked fine]
Sound ok
Examples:
.oog Totem: video and sound ok
.spx Totem: sound and display ok
.xcf Gimp: ok
.png Eye of Gnome: readable, zooming, rotation ok
.odt Open Office: ok
.rtf Open Office: ok but file included is Russian
.odg Open Office: ok
.doc Open Office: ok
.odt Open Office: ok
.ods Open Office: ok, attempt to change is blocked, does not ask to save
.xls Open Office: ok, attempt to change is blocked, but asks to save
File browser Nautilus: OK
Firefox Ok
Partition disk GPartEd: Create 1Gb NTFS partition failed. Rebooted, deleted damaged partition. Created NTFS partion at beginning and end of disk. Both automounted successfully.
Copying files to either fails as I have no write permissions (or mounted readonly).
Enable desktop effects Results in white screen (bug #90061)
| |
| old-database | 2007-04-17 00:00 |
Skewed screen - Mobility Radeon X1450 with vesa (only feisty, edgy; dapper
is ok) (#83072)
| In: |
xserver-xorg-video-vesa (Ubuntu) |
| Status: |
Fix Released |
| Importance: |
Undecided |
| Assignee: |
|
1 reports, 14 comments, 1 subscribers, 0 duplicates
| X fails to start (actually crashes) on liveCD.
Ubuntu liveCD always started X without crash, from Edgy on until Feisty Beta, the screen was always skewed, but no crash, in Feisty Beta, everything worked right. In RC1 again broken. See bug 83072, where I provide detailed info
| |
| old-database | 2007-04-17 00:00 |
Fiesty Live CD crashes during Boot (#78380)
| In: |
linux (Ubuntu) |
| Status: |
Won't Fix |
| Importance: |
Undecided |
| Assignee: |
|
1 reports, 33 comments, 8 subscribers, 1 duplicates
| FAIL: Error similar to jerrylamos. It is my work computer so I cannot take it apart to unplug the HDD to confirm jerrylamos problem. When attempting to boot liveCD, I see the splash screen for a while with the progress bar, then get to a black screen with the following message:
"BusyBox v1.1.3 (Debian 1:1.1.3-3ubuntu3) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned off
(initramfs)"
Dell Dimension 8250
Intel P4 3.06 GHz
1 GB PC1066 RDRAM
128 MB DDR ATI Radeon 9700 Pro
120 GB 7200rpm (not sure what brand)
2000FP Digital Flat Panel Display
| |
| jerrylamos | 2007-04-15 00:00 |
Feisty boot fail "can't access tty" IDE SATA problem (#106864)
| In: |
linux (Ubuntu) |
| Status: |
Fix Released |
| Importance: |
Undecided |
| Assignee: |
|
1 reports, 107 comments, 30 subscribers, 1 duplicates
| FAIL: CD Live "can't access tty" will not boot.
Dapper's running great on same system, 1280x960 LCD, Intel 82845G graphics.
Chased around mulititude of boot options and got dozens of screenfulls of errors. Most significant:
...device sda Write cache enabled Read cache enabled doesn't support DPO or FUA. More tweaking on boot commands see lots of "sector errors".
Finally saw a "fsck failed, see /var/log/checkfs" buried in the middle of the messages that roar up the screen. When the messages stop there's not much running so I can't look at or save anything with anything I tried.
The hard drive is an IDE, WDC AC143006. I disconnected it and 20070415 booted right up, no hard drive installed on the computer.
Whatever code Feisty is using to support this IDE drive doesn't work. I plugged the hard drive back in and Dapper booted right up beautifully. Any chance of a package to put hard drive IDE code into Feisty instead of SATA? Otherwise this system's staying with Dapper.
I was mislead from the "can't access tty" so I was chasing screen drivers and graphics modes. If the error had been reported as "fsck error" in the first place I'd have found the difficulty a lot sooner.
Subsequently found cabling the HD to IDE2 while CDROM still on IDE1 permitted successful install. Why should that have made any difference? Dapper ran fine with both on IDE1.
Cheers, Jerry
| |
